LabVIEW Classroom Training and Certification

Course Overview

  • Course Rating 4.5/5

Overview

This program is about LabVIEW .

Laboratory Virtual Instrument Engineering Workbench (LABVIEW) is a system-design platform and development environment for a visual programming language developed by National Instruments.

refer:

This beginner-level LabVIEW training course introduces participants to the graphical programming environment used for data acquisition, instrument control, and industrial automation. .

LabVIEW corporate training and certification oriented remote program aims to upskill you with Graphical Programming, User Interface Design, Data Handling, Basic Automation

Currently due to Covid19 outbreak, the course is available remote and however it can also be accessed online via your nearby Prog360 centre based on local availability.

Course Prerequisites

• Basic understanding of computer operation • Fundamental knowledge of programming concepts is helpful but not required

Course Content

    Introduction to LabVIEW and Basic Programming Concepts

    Module 1: Introduction to LabVIEW

    1. Overview of LabVIEW
      • What is LabVIEW?
      • Applications and uses of LabVIEW
      • Understanding the LabVIEW interface
    2. LabVIEW Environment
      • Front Panel and Block Diagram
      • Tools Palette, Controls Palette, and Functions Palette
      • Creating and saving a LabVIEW project
    3. Navigating LabVIEW
      • Exploring the LabVIEW interface
      • Creating a simple Virtual Instrument (VI)
      • Saving and organizing projects

    Module 2: Basic Programming with LabVIEW

    1. Data Types and Structures
      • Understanding different data types
      • Using arrays and clusters
    2. LabVIEW Programming Basics
      • Wiring and debugging
      • Using controls and indicators
      • Implementing basic mathematical operations
    3. Basic VI Development
      • Creating and editing VIs
      • Implementing basic calculations and data manipulations
      • Debugging and troubleshooting VIs

    Data Acquisition and Instrument Control

    Module 3: Data Acquisition with LabVIEW

    1. Introduction to Data Acquisition (DAQ)
      • Overview of DAQ systems
      • Setting up a DAQ device in LabVIEW
    2. Implementing Data Acquisition
      • Using DAQmx functions
      • Configuring and reading data from sensors
    3. Data Acquisition
      • Setting up and configuring a DAQ device
      • Acquiring and displaying sensor data
      • Implementing basic data logging

    Module 4: Instrument Control

    1. Introduction to Instrument Control
      • Understanding instrument communication protocols
      • Configuring instrument drivers in LabVIEW
    2. Controlling Instruments
      • Using VISA for instrument communication
      • Sending and receiving commands
    3. Instrument Control
      • Setting up communication with an instrument
      • Controlling and automating instrument operations
      • Reading and displaying instrument data

    Module 5: Building User Interfaces

    1. Creating User Interfaces in LabVIEW
      • Designing intuitive front panels
      • Using controls and indicators effectively
    2. Enhancing User Interfaces
      • Customizing controls and indicators
      • Implementing user interaction
    3. User Interface Design
      • Creating a user-friendly front panel
      • Enhancing the interface with custom controls
      • Implementing user interactions and feedback

    Summary and Conclusion

    1. Recap of Key Concepts
      • Review of main topics and skills learned
    2. Q&A Session
      • Addressing participant questions and clarifying doubts
    3. Next Steps
      • Recommendations for further learning and project ideas

    Hands-On Labs: 60% of the training will involve practical exercises and case study.

    Materials: Participants will receive course materials, code samples, and resources for further learning.

    Certificate of Completion: Participants who attend all sessions and successfully complete the course assessments will receive a Prog360 Certificate of Completion for the Training Program.

LabVIEW Certifications

LabVIEW course delivery involves case studies, examples, discussions and exercises to enhance the learning experience.
At the end of the training the participants will be awarded Course Completion Certificates on LabVIEW.

Post Course Evaluation

You may chose to enroll for a post course evaluation to analyse your knowledge metrics. The post course evaluation would cover the topics related to the training delivered over the period of the complete session, like:

    • Navigating the LabVIEW environment
    • Creating and editing Virtual Instruments (VIs)
    • Implementing basic data acquisition
    • Controlling instruments through LabVIEW
    • Debugging and troubleshooting LabVIEW applications
The topic listed above are only to give you a general idea and the post training evaluation may or may not restrict to these topics. Post successful evaluation attempt the participants would be awarded Evaluation Certificates on LabVIEW. Upon Completion of this Course you will accomplish following:
    • LabVIEW Interface
    • Basic Programming
    • Data Acquisition
    • Instrument Control

View All events from this course

Upcoming Sessions Near You

City
Start Date
End Date
Apply
Bengaluru, India
13-Dec-2024
14-Dec-2024
New Delhi, India
13-Dec-2024
14-Dec-2024
Mumbai, India
13-Dec-2024
14-Dec-2024
Pune, India
13-Dec-2024
14-Dec-2024
Pune, India
26-Dec-2024
27-Dec-2024
Mumbai, India
26-Dec-2024
27-Dec-2024
New Delhi, India
26-Dec-2024
27-Dec-2024
Bengaluru, India
26-Dec-2024
27-Dec-2024
Pune, India
12-Jan-2025
13-Jan-2025
Mumbai, India
12-Jan-2025
13-Jan-2025
New Delhi, India
12-Jan-2025
13-Jan-2025
Bengaluru, India
12-Jan-2025
13-Jan-2025
Mumbai, India
25-Jan-2025
26-Jan-2025
Pune, India
25-Jan-2025
26-Jan-2025
New Delhi, India
25-Jan-2025
26-Jan-2025
Bengaluru, India
25-Jan-2025
26-Jan-2025
Bengaluru, India
11-Feb-2025
12-Feb-2025
Pune, India
11-Feb-2025
12-Feb-2025
New Delhi, India
11-Feb-2025
12-Feb-2025
Mumbai, India
11-Feb-2025
12-Feb-2025
Bengaluru, India
24-Feb-2025
25-Feb-2025
New Delhi, India
24-Feb-2025
25-Feb-2025
Mumbai, India
24-Feb-2025
25-Feb-2025
Pune, India
24-Feb-2025
25-Feb-2025

LabVIEW Corporate Training

Corporate Training

Prog360 offers on-demand corporate learning and development solutions around LabVIEW that can be delivered both onsite and remote (based on availability). With Prog360, you can train your employees with our 360 Approach which not only enhance professional skills but also improvise inter-personal development. Please feel free to inquire further. We are open to discuss your requirement to provide you more customized solution specific to your needs. We will evaluate the skillset, analyze the business requirement and post that provide customized training solutions as per your business needs. Our corporate team for LabVIEW training is based across the globe hence you can reach us nearby your region as well. For general training inquiries you can contact us at training@prog360.com.

LabVIEW Consultation

Consultation

If you have already up-skilled your team and have started implementing LabVIEW, but are still facing challenges, Prog360 can still help you. Our SMEs can get on a call with you to understand the situation and provide you a plan involving the next steps covering both audit and implementation based on your problem statement. Our corporate team for LabVIEW consultation is based across the globe hence you can reach us nearby your region as well. For general consultation inquiries you can contact us at consult@prog360.com . For more nearby inquiries you can reach your nearby team.

South East Asia and Oceania

Oceania: Melbourne, Australia: 152 Elizabeth St,Melbourne,VIC,Melbourne,

Corporate Training: training.au@prog360.com

Consulting Services: consult.au@prog360.com

South East Asia: Singapore: 5, Temasek Boulevard, Singapore, Central Region, 03898, Singapore

Corporate Training: training.sg@prog360.com

Consulting Services: consult.sg@prog360.com

Contact Number :- +61 3 9015 4952

South Asia and Middle East

South Asia: Bengaluru, India: No. 78, Next to KR Puram Tin Factory, Old Madras Road, Bangalore – Mahadevapura, Bengaluru, Karnataka, 560016

Corporate Training: training.southasia@prog360.com

Consulting Services: consult.southasia@prog360.com

Middle East:- Dubai, UAE: The Offices 4, One Central Dubai World Trade Center, Dubai, Dubai, 00000, UAE

Corporate Training: training.ae@prog360.com

Consulting Services: consult.ae@prog360.com

Contact Number :- +91 9810 643 989

For any Queries

Testimonials & Reviews

Outstanding LabVIEW training. The course was very detailed with practical labs that were extremely useful for understanding LabVIEW programming.
Liam Johnson
Outstanding LabVIEW Training
Effective LabVIEW certification course. The course was well-organized with practical labs that provided valuable hands-on experience.
Aiden Harris
Effective LabVIEW Certification
Solid LabVIEW course with comprehensive content. The practical exercises were very beneficial for developing skills in LabVIEW programming.
Noah Clark
Solid LabVIEW Course
Excellent overview of LabVIEW. The course was engaging, and the practical labs provided a solid foundation in LabVIEW programming.
Ethan Young
Excellent LabVIEW Overview
Comprehensive LabVIEW course. The training provided a thorough understanding of LabVIEW with practical examples that enhanced learning.
Emma Davis
Comprehensive LabVIEW Course
View All Review From This course